Stone gloss quick repair technology

The reason why stone is loved by people, in addition to the charming natural color and hard texture, crystal clear luster is always the people's favorite. People always pursue the high luster of stone, because the higher stone luster will show the nobleness and grandeur of the stone. However, the understanding and evaluation of the luster of stone is relative. The same kind of stone, grinding and polishing equipment and materials, the gloss is not the same; the same equipment and materials, will also get different luster in different stone varieties; in addition, the gloss of the stone and processing There is a big relationship between the environment and the skills. Therefore, how to improve the polishing technology and effect of stone has been a subject of constant efforts in the industry.

The links and processes related to stone grinding and polishing can be divided into factory grinding and polishing and maintenance grinding, or large grinding and small grinding. In the factory, there are both large grinding and small grinding. The initial grinding and polishing of the stone in this section is carried out under the conditions of large equipment with high automation and specialization, so we call it a large polishing. In general, the gloss obtained by the stone under such conditions is relatively extreme. Of course, due to some factors, some small equipment and tools are used in the factory to polish and polish the stone. We call it a small polishing. For example, repair of broken sheets, processing of irregular shapes, processing of lines, and the like. Maintenance of grinding and polishing refers to reprocessing the stone gloss during the installation and application of the stone. For example, the installation of on-site stone breakage repair, flatness treatment, scratch and wear treatment, stone renovation and gloss retention. Due to environmental constraints and other factors, the treatment of stone luster in this part is mainly dependent on some small equipment and tools or even completely by hand, these are small grinding throws. Due to the limitations of equipment and materials used in small grinding and polishing, the degree of gloss obtained after grinding and polishing is also low, so we often see people complaining about the drop and unevenness of the gloss after polishing the stone.

First, the significance of improving the gloss effect of stone reprocessing

In the different stages of stone application, there will be requirements for small polishing or re-polishing of the stone part or the whole according to the needs. For example, in the case of grinding and polishing a small area of ​​stone, like in the case of repairing the board, the sheet is trimmed. In the case of the restoration of the surface gloss of the stone, as in the case of refurbishing the surface of the stone. In these cases, the grinding and polishing of the stone is difficult to obtain a gloss which is consistent with or higher than that of the large plate or the original surface due to the restriction of equipment and materials. Stone application is a systematic project, we emphasize the continuity of stone gloss. Due to individual sheet or partial treatment, these individual local gloss drops can affect the coordination and consistency of the overall effect. The overall grinding and refurbishment of the floor may also be less than the original effect. The marble countertops will also have the requirement to restore gloss due to local wear or acid corrosion. Although these conditions are a very small part of the overall application of stone, the effect will be very high attention, and these are also places that reflect details and meticulousness, and are also prone to disputes. Therefore, the restoration of the local gloss of the stone and the improvement of the regrind and polishing are very important for the overall improvement of the effect of the stone.

Second, the current situation of small grinding materials and technology in the market

For the local grinding and polishing of stone, these small grinding and polishing processes, the existing equipment and materials are still relatively old, or extend the angle grinder, water mill and wax. It is difficult to obtain a good gloss effect by using these tools and materials, and the trace of gloss is obvious, and the effect is not durable. These treated parts and parts tend to attract people's attention and have a greater impact on the evaluation of effects. For the overall grinding and refurbishment of stone floors, due to the increase in business volume in recent years, people have made great changes in equipment renewal and material investment. The refurbishment equipment has greatly improved in terms of power, gravity and speed. The matching grinding and polishing materials have also undergone major changes in types and performance, and are also more specialized and serialized. Like our company has invested a lot of power these years, has launched a series of polished products such as granite, marble, artificial stone for refurbishment and grinding, marble, artificial stone and other series for daily maintenance. Crystallized product. Relying on these serialized and specialized products, combined with scientific methods of use, no matter what the circumstances, no matter the difference in the variety of stone, you can get the re-treatment effect comparable to the original effect of the stone. There is no fast and effective professional material on the market for the wear and erosion of the top of the countertop, as well as the gloss treatment of the corners and corners of our refurbishment. For the gloss treatment of the profile and the line, although the existing equipment will give it a better luster, the seams and the like are still handled manually by people. Although there are some products such as hand-powder on the market, they are rarely used for reasons of efficiency and efficiency. So we still often see that wax is still a frequent choice for people under these conditions.

Third, a brand new stone re-grinding and polishing to quickly improve the product

Since the effect of partial treatment and re-polishing of stone has a great influence on the overall effect of stone application, and it is also a part of the market development, if it is effectively broken in this aspect, it should be said that no matter for the perfection of our enterprise product series or industry technology Complete and rich, is a progress and improvement. The stone polishing slurry SP17 is a product and technology that we have recently introduced to quickly improve or restore the gloss of the stone during partial polishing and refurbishment. High gloss is one of its highlights. Fast and convenient is its second bright spot. It can be hand-made or mechanically its third bright spot. It is the fourth bright spot for polishing in more different situations.

The stone polishing slurry SP17 cites the micro-rheological mechanism and our company's unique “ion penetration and bonding technology”, which has the advantages of fast grinding speed and bright luster, which can quickly grind and brighten even under the action of manual. Gloss. Its basic use method is: basic treatment of stone; external force grinding and polishing; cleaning treatment. The following are examples of how to use it in different situations.

1, the plate is damaged by the gloss treatment. The damaged plate is spliced ​​with an adhesive; after the colloid is hardened, the protruding colloid is leveled with a tool; then the seam is polished with 600-1000 mesh water sandpaper; the surface is cleaned; the polishing slurry SP17 is applied to the glue joint Wipe with a scouring pad for about 1 minute (about 5x30cm on the working surface); wipe the polishing slurry with a wet towel. When using water sandpaper in the third step, you can also use angle grinders and water-grinding discs as needed.

2, the polishing of the lines. When the basic treatment of the line is finished after grinding 1000# water-grinding sheet or 1000-mesh water-sand paper, clean the surface; wipe the polishing slurry SP17 on the surface, wipe with scouring pad according to the length of the working surface for about 1-2 minutes; Wipe the polishing slurry with a towel.

3, the wall seam is smoothed and polished. Use angle grinder and water-grinding piece to grind and smooth along both sides of the seam; after grinding 1000# or 3000# water-grinding piece, apply polishing slurry SP17 on the surface, use speed polishing machine and scouring pad to slow down to medium speed. Grinding and polishing, the last moment ends with high-speed grinding.

4. Polished when the marble floor is refurbished. When refurbishing marble floors, when encountering stone that is difficult to emit light, or where high gloss is required, it can be treated with polishing slurry SP17. Throw the ground grind to 1000# grinding disc; clean the surface dust; apply a proper amount of polishing slurry SP17 on the surface; use a polishing machine and a cleaning pad to grind for about 1 minute; clean the slurry, then use a clean scouring pad. Dry the stone surface with a polishing machine to remove the traces of the slurry remaining on the surface of the stone.

5, the treatment of the corner gloss when the marble floor is refurbished. When the marble floor is refurbished, there may be omissions or machine wear in places such as corners and corners. At this time, the slurry SP17 can be selected for processing. The base treatment is carried out with a water sandpaper or an angle grinder, and the polishing slurry SP17 is applied to the surface thereof, and polished by a hand or a small polishing machine.

6, grinding and polishing of granite. When it is necessary to partially polish the granite, in addition to the granite polishing agent GR8, the granite polishing agent GR8 and the polishing slurry SP17 can also be mixed and used, and the mixing ratio is about 1:3. The mixed polishing slurry is applied to the polishing surface, and the polishing machine is added with a scouring pad or a steel wire to grind it; the polished working surface is cleaned.

7, the repair of the surface gloss of the countertop. When the countertop is partially damaged by acid liquid or damaged by abrasion, it can be re-polished using the slurry SP17. According to the damage of the gloss, use 600-1000 mesh water sandpaper to polish; wipe the surface; apply the polishing slurry SP17 to the glue joint, wipe it with a scouring pad; wipe the polishing slurry with a wet towel. If the overall gloss of the surface of the countertop is lowered, the polishing slurry SP17 can be used for re-polishing and refurbishing. It is recommended to use a hand-held variable speed polishing machine, which is also operated according to the principle of slow speed increase from low speed to high speed.

8, the use of polishing slurry SP17 should pay attention to matters.

The pH value of the polishing slurry SP17 is acid, so it is necessary to properly protect the surrounding objects during use. When the stone is partially treated, it is necessary to prevent the slurry from splashing to other parts to burn the surface gloss.

When wiping the slurry SP17, a small amount of water can be sprayed on the work surface to make the grinding easier.